Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-5A20
    VOLVO

    ECM-5A20 - pre-supply pump. Power supply missing

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    4 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (10)
    • Volvo C30 (2007–2013)2007Kun motor: D5244T8, D5244T9
    • Volvo C30 (2007–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
    • Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
    • Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
    • Volvo S40 (2004–2013)2006Kun motor: D5244T8
    • Volvo S40 (2004–2013)2007Kun motor: D5244T8, D5244T9
    • Volvo S40 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
    • Volvo V50 (2004–2013)2006Kun motor: D5244T8
    • Volvo V50 (2004–2013)2007Kun motor: D5244T8, D5244T9
    • Volvo V50 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9

    Hva betyr feilkoden?

    The engine control module (ECM) receives feed pump information over the CAN network. The code is set when the feed pump and the fuel pressure are both faulty at the same time. Engine performance may suffer or the engine may be hard to start, and a message is shown in the display.

    Mulige årsaker

    • No voltage supply to the feed pump
    • Fuel system fault, according to the other fault codes
    • Feed pump signal missing or faulty on the CAN network
    • Fault in the rear control module (REM)

    Hva du kan gjøre

    1. 1Read the codes in the engine control module and fix those for the fuel system first
    2. 2Check that the relevant fuses for the feed pump are intact
    3. 3With a multimeter, check that the supply lead to the feed pump is not broken
    4. 4If you have a diagnostic tool, activate the feed pump with it and listen for it to start
    5. 5If the fault remains, have a workshop check the fuel pressure and the CAN communication to the rear control module

    Symptomer du kan merke3

    • A message is shown in the text display
    • Reduced performance
    • The engine does not start

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.