Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-603D
    VOLVO

    ECM-603D - Turbocharger (TC) control system. Signal too low

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    4 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (9)
    • Volvo C30 (2007–2013)2007Kun motor: B5254T3
    • Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
    • Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
    • Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
    • Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
    • Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
    • Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
    • Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
    • Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7

    Hva betyr feilkoden?

    The engine control module (ECM) compares the measured boost pressure with its target value. If the boost pressure becomes lower than the target, a fault is registered. The cause may lie in the valve, the hoses or the charge air cooler, or in the wastegate valve and its pressure servo.

    Mulige årsaker

    • Damaged turbocharger control valve
    • Damaged charge air cooler
    • One hose from the wastegate valve servo to the turbo control valve has worked loose, or is clogged or cracked
    • Hoses between the turbocharger control valve and the charge air pipe are blocked or damaged
    • Incorrectly adjusted or damaged pressure servo on the wastegate valve
    • Sticking wastegate valve

    Hva du kan gjøre

    1. 1Check that the hose between the wastegate valve pressure servo and the turbocharger control valve is correctly fitted and not damaged or blocked
    2. 2Check that the hose running from the charge air pipe to the turbo control valve is fitted correctly and is neither damaged nor clogged
    3. 3Check that the charge air cooler is not blocked
    4. 4With a diagnostic tool: activate the turbocharger control valve and check that it clicks. A damaged valve can be hard to detect that way
    5. 5Check that the wastegate valve moves freely and is not sticking. Setting the pressure servo is a job for a workshop

    Symptomer du kan merke1

    • Poor performance

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.