VOLVO
ECM-6110 - Camshaft position control, intake. Slow
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
9 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (23)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2005–2006Kun motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The engine control module (ECM) compares the actual position of the intake camshaft with the position it has requested. If the camshaft does not reach the requested position within a set time, the code is set. The check takes place while the engine is running and camshaft control is active.
Mulige årsaker
- Low oil pressure
- Poor engine oil quality or contamination in the oil
- Damaged or sticking camshaft reset valve
- A mechanical fault inside the VVT unit
Hva du kan gjøre
- 1Check the fuse that feeds the camshaft reset valve
- 2Check the oil level and oil condition, particularly for contamination
- 3With a diagnostic tool: compare the actual camshaft position with the requested position in live data while the engine speed is raised, and check that they agree
- 4Have a workshop check the oil pressure, remove and clean the reset valve, and check the oil passages in the cylinder head
- 5If none of this finds the cause, have a workshop replace the reset valve or check the VVT unit
Symptomer du kan merke4
- The malfunction indicator lamp is lit or behaves abnormally
- The engine is hard to start or cranks slowly
- Poor performance and lack of power
- The engine hesitates, surges or runs unevenly
Hva feilen kan påvirke1
- Camshaft control for the intake valves is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.