VOLVO
ECM-611B - Camshaft control, intake. Faulty
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (23)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2005–2006Kun motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The engine control module (ECM) has found that the actual position of the intake camshaft does not match the position the control module has requested. The code is set if the requested position is not reached, and the check takes place while the engine is running and camshaft control is active.
Mulige årsaker
- Low oil pressure
- Poor engine oil quality or contamination in the oil
- Damaged or sticking camshaft reset valve
- A mechanical fault inside the VVT unit
Hva du kan gjøre
- 1Check the fuse that feeds the camshaft reset valve
- 2Check the oil level and oil condition, and look for contamination
- 3With a diagnostic tool: see in live data whether the actual camshaft position follows the requested position as the engine speed rises
- 4Have a workshop clean or replace the reset valve and check the oil passages in the cylinder head
- 5If this does not solve the problem, have a workshop check the VVT unit
Symptomer du kan merke4
- The malfunction indicator lamp is lit or behaves abnormally
- The engine is hard to start or cranks slowly
- Poor performance and lack of power
- The engine hesitates, surges or runs unevenly
Hva feilen kan påvirke1
- Camshaft control for the intake valves is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.