VOLVO
ECM-6200 - Alternator. Signal missing
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo C30 (2007–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Kun motor: D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Kun motor: D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The engine control module (ECM) and the alternator control module (ACM) communicate with each other over a signal cable. The code is set when the ECM receives word of an alternator fault or when communication between the modules breaks down. The battery can then discharge, because the alternator is not charging properly.
Mulige årsaker
- Open circuit in the link between the two control modules
- Contact resistance or oxidation in the connectors
- Worn carbon brushes in the alternator
- Damaged alternator control module (ACM)
- Damaged auxiliary drive belt or belt tensioner
- An alternator not built for LIN communication has been fitted
Hva du kan gjøre
- 1If the alternator has recently been replaced, check that it is intended for this car and for communication with the control modules
- 2Check that the alternator drive belt is correctly fitted, not worn, and that the belt tensioner works
- 3Check that the connector to the alternator control module is firmly seated and free from contact resistance and oxidation
- 4Use a multimeter to check the signal cable for breaks and for short circuits to ground or voltage
- 5With a diagnostic tool: start the engine and read the alternator charging current in live data
Symptomer du kan merke3
- Message in the information display
- The battery discharges
- The alternator warning lamp is lit with the engine running
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.