VOLVO
ECM-639A - Injector class not programmed. Configuration fault
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (10)
- Volvo S60 (2001–2009)2001Kun motor: D5244T
- Volvo S60 (2001–2009)2002–2003, 2006Kun motor: D5244T, D5244T2
- Volvo S60 (2001–2009)2004–2005Kun motor: D5244T, D5244T2, D5244T3
- Volvo S80 (1999–2006)2001Kun motor: D5244T
- Volvo S80 (1999–2006)2002–2006Kun motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2001Kun motor: D5244T
- Volvo V70 (2000–2008)2002–2003, 2006Kun motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2004–2005Kun motor: D5244T, D5244T2, D5244T3
- Volvo V70 XC / XC70 (2001–2007)2003–2006Kun motor: D5244T
- Volvo XC90 (2003–)2003–2006Kun motor: D5244T
Hva betyr feilkoden?
The engine control module (ECM) lacks the optimizing parameters for the injectors, which must match the injector class. It is a configuration fault: the parameters need to be entered into the control module.
Mulige årsaker
- Optimizing parameters are not programmed
Hva du kan gjøre
- 1Have a workshop program in the optimizing parameters that match the injector class
- 2If the injectors or the engine control module have been replaced, have the workshop check afterwards that the programming matches
- 3Clear the code after programming and see whether it returns
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.