VOLVO
ECM-660C - Malfunction indicator lamp (MIL). Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (14)
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2005–2006Kun motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
Although the fault code is named signal too high, it applies to a short to supply voltage in the lamp wiring. The engine control module treats this as a fault and stores the fault code. The fault may instead come from an open circuit in the ground wire.
Mulige årsaker
- Open circuit in the ground wire
Hva du kan gjøre
- 1Check the ground wire to the malfunction indicator lamp for open circuits and loose connections
- 2Use a multimeter to check that the circuit to the malfunction indicator lamp is not shorted to supply voltage
- 3Check that the connectors in the instrument panel are secure and undamaged
- 4Repair any damage in the wiring and clear the fault code afterwards
Symptomer du kan merke1
- The malfunction indicator lamp is lit
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.