VOLVO
ECM-6700 - Engine pads. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (10)
- Volvo S60 (2001–2009)2001Kun motor: D5244T
- Volvo S60 (2001–2009)2002–2003, 2006Kun motor: D5244T, D5244T2
- Volvo S60 (2001–2009)2004–2005Kun motor: D5244T, D5244T2, D5244T3
- Volvo S80 (1999–2006)2001Kun motor: D5244T
- Volvo S80 (1999–2006)2002–2006Kun motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2001Kun motor: D5244T
- Volvo V70 (2000–2008)2002–2003, 2006Kun motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2004–2005Kun motor: D5244T, D5244T2, D5244T3
- Volvo V70 XC / XC70 (2001–2007)2003–2006Kun motor: D5244T
- Volvo XC90 (2003–)2003–2006Kun motor: D5244T
Hva betyr feilkoden?
The fault code applies to the control signal to the vacuum valve for the engine mounts. It is stored when the signal is too high or too low. When the signal is too low, the wire may be shorted to ground or have an open circuit.
Mulige årsaker
- Signal wire shorted to ground
- Open circuit in the signal wire
- Defective vacuum valve
- Faulty power supply
Hva du kan gjøre
- 1Check the connector at the vacuum valve for contact resistance and oxidation, and clean it if needed
- 2Use a multimeter to check that the wire to the vacuum valve has no open circuit and is not shorted to ground
- 3Look for chafing or pinched spots on the wire
- 4Replace the vacuum valve if the connector and wire are in order but the fault remains
Symptomer du kan merke2
- Vibrations at idle
- The engine mounts bottom out when accelerating or when the throttle is released
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.