VOLVO
ECM-670C - Camshaft position, intake. High
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (14)
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2005–2006Kun motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The engine control module has registered that the intake camshaft sits too far forward, ahead of the crankshaft, during adaptation. The fault code is then stored and camshaft control is switched off.
Mulige årsaker
- Poor engine oil quality
- Incorrectly adjusted camshafts
- The timing belt has jumped over the teeth
- Damaged camshaft reset valve
- Mechanical fault in the VVT unit
Hva du kan gjøre
- 1Check the oil level and quality, since poor oil can affect the control
- 2Have a workshop check that the timing belt is correctly seated and that the camshaft basic setting is right
- 3If you have a diagnostic tool: read the intake camshaft adaptation at warm idle and compare it with the given range
- 4Have a workshop clean the reset valve, or replace it if it has stuck
- 5If the fault remains after this, the VVT unit may be damaged, which a workshop needs to assess
Symptomer du kan merke1
- The malfunction indicator lamp is lit
Hva feilen kan påvirke1
- The engine control module switches off camshaft control
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.