VOLVO
ECM-670D - Camshaft position, intake. Low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (14)
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2005–2006Kun motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The engine control module has registered that the intake camshaft sits too far back, behind the crankshaft, during adaptation. The fault code is then stored and camshaft control is switched off.
Mulige årsaker
- Poor engine oil quality
- Camshafts incorrectly adjusted
- The timing belt has jumped over the teeth
- Damaged air conditioning compressor
- Faulty camshaft reset valve
- Mechanical fault in the VVT unit
Hva du kan gjøre
- 1Oil must be at the right level and grade and free of contamination, so check it first
- 2The diagnostic tool shows the intake camshaft adaptation at idle with a warm engine. Check that the value lies within the acceptable range
- 3Have a workshop adjust the camshaft settings against the crankshaft using the prescribed method
- 4Have a workshop check that the timing belt has not jumped over the teeth
- 5If the fault remains after the adjustment, the reset valve may need cleaning or replacing
Symptomer du kan merke1
- The malfunction indicator lamp is lit
Hva feilen kan påvirke1
- Camshaft control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.