Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-680C
    VOLVO

    ECM-680C - Engine cooling fan (FC) control modules. Signal too high

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Vis modeller per årsmodell og motor (14)
    • Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
    • Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
    • Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
    • Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
    • Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
    • Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
    • Volvo V70 (2000–2008)2008Kun motor: B5254T2
    • Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
    • Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
    • Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
    • Volvo XC90 (2003–)2005–2006Kun motor: B5254T2, B6294T
    • Volvo XC90 (2003–)2007–2012Kun motor: B5254T2
    • Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
    • Volvo XC90 (2003–)2015

    Hva betyr feilkoden?

    The ECM monitors the wiring to the cooling fan serving the control module box. If the fan signal reaching the control module box reads too high, with the ignition on or the engine running, the code is set. The cause may be a signal wire that has been shorted to supply voltage, or a damaged fan.

    Mulige årsaker

    • Signal wire shorted to supply voltage
    • Damaged cooling fan

    Hva du kan gjøre

    1. 1Check the signal wire for open circuits and for a short to supply voltage, especially where the cable could chafe
    2. 2With the ignition off and the connector disconnected, use a multimeter to check whether the signal wire has voltage to ground (body)
    3. 3With diagnostic equipment, activate the cooling fan for the control modules and listen for it to start
    4. 4If the wire is intact but the fault remains, have a workshop try a new cooling fan

    Symptomer du kan merke1

    • Malfunction indicator lamp (MIL) on

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.