VOLVO
ECM-6840 - Turbo control. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo C30 (2007–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Kun motor: D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Kun motor: D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The ECM drives the turbo control motor with a pulse-width modulated signal. If the module finds a problem with the signal feeding the turbo control system, the code is set, and it is checked with the engine running. The fault may be due to poor contact at the connections, an open circuit in the signal or supply wire, a damaged turbo control motor or an internal fault in the control module.
Mulige årsaker
- Contact resistance or oxidation in the connectors
- Open circuit in the signal wire
- Open circuit in the power supply
- Damaged turbo control motor
- Internal fault inside the ECM itself
Hva du kan gjøre
- 1Read the code, clear it and road test the car with the engine running to see whether it returns
- 2Check the connections for contact resistance, loose contact and oxidation
- 3With the ignition off and the connector disconnected, use a multimeter to check that the supply and signal wires are intact
- 4Check that the fuses for the turbocharger control system are intact
- 5If the wiring is intact but the fault remains, have a workshop check the turbo control motor and the engine control module
Symptomer du kan merke2
- Message in the information display
- Poor performance
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.