ECM-7100 - Immobilizer communication. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
9 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (23)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2005–2006Kun motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The immobilizer is an electronic start inhibitor that requires the same code to be present in the engine control module (ECM) and in the central electronic module (CEM). Before the engine is allowed to start, the codes are checked against each other. If they do not match, the code is set with the ignition on, and the engine does not start. The cause may be a wrong code in either module, or that one of them is not programmed.
Mulige årsaker
- The ECM holds an immobilizer code that does not match
- The CEM holds an immobilizer code that does not match
- The ECM was never programmed, so it holds no code
- The CEM was never programmed, so it holds no code
- Damaged engine control module (ECM)
- Damaged central electronic module (CEM)
Hva du kan gjøre
- 1Read the codes in the central electronic module (CEM) and correct them first, since they may show where the fault lies
- 2With the ignition on, check that the connectors to the engine control module and the CEM are firmly seated and free from oxidation
- 3Has the module been replaced or moved from another car? Programmed modules cannot be moved between cars, so this needs a workshop
- 4Have a workshop check and, if needed, reprogram the immobilizer code; you cannot do this yourself
- 5Once the workshop is finished, start the engine and check that the fault has gone
Symptomer du kan merke1
- The engine cranks but will not start
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.