VOLVO
ECM-7600 - Immobilizer. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
7 modellerC30 (2007–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (13)
- Volvo C30 (2007–2013)2007–2008, 2010–2011Kun motor: D4164T
- Volvo S40 (2004–2013)2005–2008, 2010–2011Kun motor: D4164T
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2005–2008, 2010–2011Kun motor: D4164T
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The engine control module (ECM) checks the immobilizer code against the central electronic module (CEM) before the engine is allowed to start. If the code is missing or wrong, the fault code is set and the engine does not start. The fault applies to the C30, S40 (04-), S60 (-09), V50, V70, V70 XC and XC90.
Mulige årsaker
- Wrong ignition key
- Low battery voltage
- Poor plug contact or corrosion at the ECM connector
- Open circuit or short to ground in the power supply to the ECM
- Open circuit in the CAN wiring
Hva du kan gjøre
- 1Check that you are using the correct ignition key, and try another key if you have one
- 2Check that the battery voltage is normal and charge the battery if needed
- 3Check that the connector to the engine control module is secure and free from corrosion
- 4Check that the fuses for the engine control module are intact
- 5If the fault remains, have a workshop check the power supply and the CAN wiring to the engine control module
Symptomer du kan merke1
- The engine does not start, sometimes or all the time
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.