VOLVO
ECM-7610 - Immobilizer. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (16)
- Volvo C30 (2007–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo C30 (2007–2013)2008, 2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2009Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2011Kun motor: D4164T
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2005, 2011Kun motor: D4164T
- Volvo S40 (2004–2013)2006Kun motor: D4164T, D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo S40 (2004–2013)2008, 2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2009Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V50 (2004–2013)2005, 2011Kun motor: D4164T
- Volvo V50 (2004–2013)2006Kun motor: D4164T, D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo V50 (2004–2013)2008, 2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo V50 (2004–2013)2009Kun motor: D5244T13, D5244T8, D5244T9
Hva betyr feilkoden?
Before allowing the engine to start, the ECM compares the vehicle serial number kept in the BCM. If the serial number is missing or does not match, the fault code is set and the engine does not start. The fault applies to the C30, C70 (06-), S40 (04-) and V50.
Mulige årsaker
- Wrong ignition key
- Low battery voltage
- Plug at the ECM is loose, or contacts are corroded
- A break or noise on the link between the CEM and the ECM
- Faulty CAN communication
Hva du kan gjøre
- 1Check that you are using the correct ignition key and that the battery voltage is normal
- 2Check that the connectors to the engine control module are secure and free from contact resistance and oxidation
- 3Read and note the code, clear it and road test to see whether it returns
- 4Work on the brake control module (BCM) should be done by a workshop, as it controls the braking system
- 5If the fault remains, have a workshop with diagnostic equipment compare the serial numbers in the brake control module and the engine control module
Symptomer du kan merke1
- The engine does not start, sometimes or all the time
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.