VOLVO
ECM-8200 - Battery voltage. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerC70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (13)
- Volvo C70 (2006–2013)2006Kun motor: B5254T3
- Volvo S40 (2004–2013)2005–2006Kun motor: B5254T3
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V50 (2004–2013)2005–2006Kun motor: B5254T3
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006Kun motor: B5204T5, B5244T5, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo XC90 (2003–)2005–2006Kun motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The ECM monitors the feed that comes through the system relay and has registered a faulty battery voltage. The fault is caused by a damaged engine control module. The engine may stall or fail to start. The fault applies to the C70 (06-), S40 (04-), S60 (-09), S80 (-06), V50, V70 (00-08), V70 XC and XC90.
Mulige årsaker
- Damaged engine control module
Hva du kan gjøre
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check the battery voltage and condition
- 3Check that the connectors to the engine control module are secure and clean
- 4If the fault returns, have a workshop replace the engine control module and program it
Symptomer du kan merke2
- The engine stalls
- The engine does not start
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.