VOLVO
ECM-8210 - System relay. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (19)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo XC90 (2003–)2005–2006Kun motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The ECM monitors the feed through the system relay and has logged a faulty signal. The cause may be a faulty charging system, contact resistance in the connections or a damaged system relay. The starter cranks but the engine will not run, and the injectors are switched off.
Mulige årsaker
- Faulty charging system
- Contact resistance in the connections
- Damaged system relay
Hva du kan gjøre
- 1Check the battery voltage and condition
- 2Check the fuse for the circuit; if it is blown, check that the circuit is not shorted to ground
- 3Check that the connectors at the engine control module and the system relay are secure and clean
- 4If you have a diagnostic tool: read the relay's voltage feed to the ECM in live data
- 5If no fault is found, have a workshop try a new system relay
Symptomer du kan merke1
- The starter cranks but the engine will not run
Hva feilen kan påvirke1
- The injectors are switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.