Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-843D
    VOLVO

    ECM-843D - Starter motor relay. Signal too low

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    4 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (9)
    • Volvo C30 (2007–2013)2007Kun motor: B5254T3
    • Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
    • Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
    • Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
    • Volvo S40 (2004–2013)2006–2007Kun motor: B5254T3
    • Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
    • Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
    • Volvo V50 (2004–2013)2006–2007Kun motor: B5254T3
    • Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7

    Hva betyr feilkoden?

    The engine control module (ECM) compares the voltage on the starter motor relay signal wire with a limit value at start. If the voltage stays below the limit for a certain time, the control module registers a fault and sets the code. The cause may be a short to ground or an open circuit in the signal wire, a faulty relay, an open circuit in the supply to the starter motor or a damaged control module.

    Mulige årsaker

    • The signal wire is shorted to ground
    • Open circuit in the signal wire
    • Open circuit in the supply to the starter motor
    • Damaged starter motor relay
    • Damaged control module

    Hva du kan gjøre

    1. 1Read the code, clear it and check that it does not return at the next start
    2. 2With the ignition off, check the connectors to the starter motor relay for loose fit, oxidation and contact resistance
    3. 3Check the signal wire for breaks, and use a multimeter against ground (the body) to confirm it is not shorted
    4. 4Check that the starter motor relay is undamaged and seated properly
    5. 5If the fault remains after these checks, have a workshop check the supply to the starter motor and the control module

    Symptomer du kan merke1

    • The engine does not start

    Hva feilen kan påvirke1

    • Only manual starting is possible

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.