VOLVO
ECM-8700 - Power supply. Internal fault
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (10)
- Volvo S60 (2001–2009)2001Kun motor: D5244T
- Volvo S60 (2001–2009)2002–2003, 2006Kun motor: D5244T, D5244T2
- Volvo S60 (2001–2009)2004–2005Kun motor: D5244T, D5244T2, D5244T3
- Volvo S80 (1999–2006)2001Kun motor: D5244T
- Volvo S80 (1999–2006)2002–2006Kun motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2001Kun motor: D5244T
- Volvo V70 (2000–2008)2002–2003, 2006Kun motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2004–2005Kun motor: D5244T, D5244T2, D5244T3
- Volvo V70 XC / XC70 (2001–2007)2003–2006Kun motor: D5244T
- Volvo XC90 (2003–)2003–2006Kun motor: D5244T
Hva betyr feilkoden?
The engine control module (ECM) has found a fault in the voltage stabilizer that supplies the sensors. The code is set when the fault is detected. It is an internal fault in the control module, so the module needs replacing. A new control module is delivered without software and must be programmed after fitting.
Mulige årsaker
- Defective engine control module
Hva du kan gjøre
- 1Read the code, clear it and check whether it returns
- 2Check that the battery is in good condition and that the earth connections are tight and free from oxidation
- 3Have a workshop replace and program the control module; programming can only be done with workshop equipment
Symptomer du kan merke3
- The engine cuts out
- The engine does not start
- The engine runs unevenly
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.