VOLVO
ECM-880F - Ignition switch. Signal missing
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (23)
- Volvo C30 (2007–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2011Kun motor: D4164T
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2005, 2011Kun motor: D4164T
- Volvo S40 (2004–2013)2006Kun motor: D4164T, D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2005, 2011Kun motor: D4164T
- Volvo V50 (2004–2013)2006Kun motor: D4164T, D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The engine control module (ECM) is meant to receive 15 supply, meaning voltage from the ignition, through the system relay and the central electronic module (CEM). The code is set when the control module cannot register that supply at start, or when the supply is missing. The fault may be poor contact, a fault in the system relay or an open circuit in the supply wire.
Mulige årsaker
- Loose connection, contact resistance or oxidation in the connections
- System relay fault
- Open circuit in the voltage supply wire
Hva du kan gjøre
- 1Read the code, clear it and check whether it returns when the ignition is switched on
- 2With the ignition on, check that battery voltage reaches the control module; use a multimeter between the supply and ground
- 3Check the control module connector for contact resistance, loose fit and oxidation
- 4Check the voltage supply wire for an open circuit with a multimeter
- 5If the fault remains after these checks, have a workshop check the system relay and the central electronic module
Symptomer du kan merke2
- The engine does not start
- A message appears in the text display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.