VOLVO
ECM-900D - Brake pedal sensor. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
Hva betyr feilkoden?
The engine control module (ECM) monitors the brake pedal sensor and stop lamp switch while the engine runs. The code is set as a consequence of a fault in the brake control module (BCM), so that fault must be fixed first. This code can be cleared only after the code in the brake control module has been fixed and erased.
Mulige årsaker
- A fault in the brake control module (BCM) or the central electronic module (CEM)
Hva du kan gjøre
- 1Read the codes stored in the BCM and the CEM first
- 2Fix the faults there and erase them; only then can this code be cleared
- 3Do not work on the brake system yourself; if the fault does not go away, have a workshop carry out the brake-related checks
Symptomer du kan merke1
- Cruise control does not work at all
Hva feilen kan påvirke1
- Cruise control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.