VOLVO
ECM-9011 - Brake pedal sensor, signal via CAN. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
Hva betyr feilkoden?
The engine control module (ECM) receives the brake pedal sensor signal over the CAN network from the brake control module (BCM). The code is set if that signal is faulty or if the CAN communication has a fault. It is a consequence of a fault in the brake control module, so that fault should be fixed first and the code cleared afterwards.
Mulige årsaker
- Fault in the brake control module (BCM)
Hva du kan gjøre
- 1Read the codes in the BCM first and remedy them
- 2Clear this code only after the code in the brake control module has been remedied and erased
- 3The brake system is safety-critical; if the fault remains after checking the brake control module, have a workshop take over the fault finding on the brake circuit
Symptomer du kan merke1
- Cruise control does not work at all
Hva feilen kan påvirke1
- Cruise control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.