VOLVO
ECM-901B - Brake pedal sensor, signal via CAN. Signal missing
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
Hva betyr feilkoden?
The engine control module (ECM) receives no valid brake pedal signal over the CAN network from the brake control module (BCM), and the code is set. The cause lies in the brake control module, so this code is a consequence of that fault. Fix the BCM fault first; this code can be cleared only once the fault in the brake control module has been fixed and erased.
Mulige årsaker
- The cause lies in the brake control module (BCM)
Hva du kan gjøre
- 1Read the codes in the BCM and trace those first
- 2Clear this code only after the code in the brake control module has been fixed and erased
- 3Because the fault concerns the brake system, have a workshop take over if the brake control module check finds nothing
Symptomer du kan merke1
- Cruise control does not work at all
Hva feilen kan påvirke1
- Cruise control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.