VOLVO
ECM-901D - Brake pedal sensor, signal via CAN. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
Hva betyr feilkoden?
The ECM has registered that the brake pedal sensor signal, sent over the CAN network from the brake control module (BCM), is too low, or that the CAN communication has a fault. The code is a follow-on fault that is first set in the brake control module. Fault finding should therefore be done there, and this code can be cleared once the fault in the brake control module has been fixed.
Mulige årsaker
- The cause lies in the brake control module (BCM)
Hva du kan gjøre
- 1Read the codes in the BCM first, and trace and fix them
- 2Clear this code only after the code in the brake control module has been fixed and erased
- 3If the fault cannot be found in the brake control module, have a workshop continue the fault finding; the brake system is safety-critical
Symptomer du kan merke1
- Cruise control does not work at all
Hva feilen kan påvirke1
- Cruise control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.