VOLVO
ECM-910C - Clutch pedal sensor. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerC70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (17)
- Volvo C70 (2006–2013)2006Kun motor: B5254T3
- Volvo S40 (2004–2013)2005–2006Kun motor: B5254T3
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V50 (2004–2013)2005–2006Kun motor: B5254T3
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2005–2006Kun motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The ECM finds a signal from the clutch pedal sensor that is too high, or receives an error message over CAN from the central electronic module (CEM) that points to it. The code cannot be cleared until the CEM fault has been fixed and erased, so the CEM codes are dealt with first.
Mulige årsaker
- Signal wire shorted to voltage
- Damaged clutch pedal sensor
- The fault lies in the central electronic module (CEM)
Hva du kan gjøre
- 1Read the codes in the central electronic module (CEM) first and remedy them; this code can be cleared only after that
- 2If you have diagnostic equipment, read the clutch pedal movement in live data while pressing and releasing the pedal slowly; the value should change with the pedal movement
- 3Use a multimeter to check that the clutch pedal signal wire has no contact with battery voltage
- 4Check that the clutch pedal sensor is fitted correctly and look for damage
Symptomer du kan merke1
- Cruise control does not work at all
Hva feilen kan påvirke1
- Cruise control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.