VOLVO
ECM-910D - Clutch pedal sensor. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerC70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (17)
- Volvo C70 (2006–2013)2006Kun motor: B5254T3
- Volvo S40 (2004–2013)2005–2006Kun motor: B5254T3
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V50 (2004–2013)2005–2006Kun motor: B5254T3
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2005–2006Kun motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The ECM finds a signal from the clutch pedal sensor that is too low, or receives an error message over CAN from the central electronic module (CEM) that points to it. Fault finding is done in the CEM first, since this code cannot be cleared until the fault there has been fixed and erased.
Mulige årsaker
- The signal wire is shorted to ground
- A damaged clutch pedal sensor
- The fault lies in the central electronic module (CEM)
Hva du kan gjøre
- 1Read the codes in the central electronic module (CEM) first, and trace and fix them
- 2Clear this code only after the code in the CEM has been fixed and erased
- 3If you have diagnostic equipment, read the clutch pedal movement in live data while slowly pressing and releasing the pedal; the value should change with the pedal movement
- 4Use a multimeter to check that the clutch pedal sensor signal wire is not shorted to ground (the body), and check the connectors for oxidation
- 5If the fault remains, have a workshop check the clutch pedal sensor
Symptomer du kan merke1
- Cruise control does not work at all
Hva feilen kan påvirke1
- Cruise control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.