VOLVO
ECM-911B - Clutch pedal sensor. Signal missing
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
Hva betyr feilkoden?
Although the code is named signal missing, it can also mean that the clutch pedal sensor reports a wrong value, or that CAN communication is faulty. The engine control module (ECM) gets an error report from the central electronic module (CEM) via CAN and stores the code. There is no separate troubleshooting, and the code cannot be erased until the fault in the CEM is remedied.
Mulige årsaker
- The signal from the clutch pedal sensor is missing or faulty, according to the central electronic module (CEM)
- Fault in the communication on the CAN network
Hva du kan gjøre
- 1First read off the fault codes in the central electronic module (CEM) and remedy the cause there, as this code cannot be erased before then
- 2Once the fault in the CEM is remedied and erased, you can erase this code too
- 3Check the connector at the clutch pedal sensor and the wiring to it for loose contacts, oxidation and chafed areas
- 4If you have a diagnostic tool: follow the clutch pedal position in live data and check that the value changes smoothly when the pedal is pressed and released
Symptomer du kan merke1
- The cruise control does not work at all
Hva feilen kan påvirke1
- The cruise control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.