VOLVO
ECM-911D - Clutch pedal sensor. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
Hva betyr feilkoden?
The engine control module (ECM) has been sent an error report by the central electronic module (CEM) via CAN. It concerns a clutch pedal sensor that gives too low a signal, or a communication fault on the CAN network. There is no separate troubleshooting for this code, and it cannot be erased until the fault in the CEM is remedied.
Mulige årsaker
- Too low a signal from the clutch pedal sensor, reported by the CEM
- Fault in the communication on the CAN network
Hva du kan gjøre
- 1First read off the fault codes in the central electronic module (CEM) and carry out the troubleshooting there
- 2Erase the CEM fault codes once the cause is remedied, and erase this code afterwards
- 3Use a multimeter to check that the wiring to the clutch pedal sensor has no open circuit
- 4If you have a diagnostic tool: compare the clutch pedal position in live data with the actual pedal movement. The value should follow it without jumps
Symptomer du kan merke1
- The cruise control does not work at all
Hva feilen kan påvirke1
- The cruise control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.