VOLVO
ECM-925D - Electronic throttle unit. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (23)
- Volvo C30 (2007–2013)2007Kun motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Kun motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Kun motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo S40 (2004–2013)2008Kun motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Kun motor: B5254T7
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Kun motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V50 (2004–2013)2005–2007Kun motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Kun motor: B5254T7
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Kun motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Kun motor: B5254T2
- Volvo XC90 (2003–)2005–2006Kun motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The code means the signal from the throttle unit is too low. It is stored when the engine control module (ECM) tries to adapt the throttle unit and detects restricted throttle movement, or a return spring that is not working properly.
Mulige årsaker
- The throttle is sticking or blocked, for example by oil film or dust
- Contact resistance or oxidation in the connectors linking the ECM to the throttle unit
- Open circuit, or short to ground or supply voltage, in the wiring to the throttle motor
- The throttle motor wires shorted to each other
- A damaged throttle unit
Hva du kan gjøre
- 1Read and note the fault codes. If codes for the throttle unit, throttle position sensor or ECM are also stored, deal with those first
- 2Check that nothing is blocking the throttle and that it is not sticking. Clean as needed
- 3Check that the connectors at the throttle unit and the ECM are secure and free from corrosion
- 4Use a multimeter to check that the throttle motor wiring has no open circuit, no contact with ground (body) or supply voltage, and no short to each other
- 5If you have a diagnostic tool: follow the throttle angle in live data while the pedal is pressed and released. It should change smoothly, without jumps
- 6If the code returns, this points to a damaged throttle unit. If it is replaced it must be adapted, which a workshop with diagnostic equipment does
Symptomer du kan merke2
- Malfunction indicator lamp (MIL) on
- Reduced engine performance
Hva feilen kan påvirke1
- Depending on the fault, the ECM may cut power to the throttle motor, and the throttle then returns to its spring-loaded position
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.