VOLVO
ECM-9290 - Engine control module (ECM). Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (10)
- Volvo S60 (2001–2009)2005–2006Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S80 (1999–2006)2005–2006Kun motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V70 (2000–2008)2005Kun motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006Kun motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 XC / XC70 (2001–2007)2005Alle motorer unntatt: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Kun motor: B5244T4, B5254T2
- Volvo XC90 (2003–)2005–2006Kun motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Kun motor: B5254T2
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The engine control module (ECM) controls the throttle angle with an internal governor. Although the code is titled faulty signal, it is stored when the ECM finds the governor damaged, or its control signal running to an extreme while the throttle is controlled. The fault is checked with the engine running and can be permanent or sporadic.
Mulige årsaker
- The throttle sticks or is blocked by oil film or dust
- Contact resistance or oxidation in the connectors between the ECM and the throttle unit
- Open circuit, or short to ground or supply voltage, in the wiring to the throttle motor
- The throttle motor wires shorted to each other
- A damaged throttle unit
- Faulty software in the ECM
Hva du kan gjøre
- 1If you have a diagnostic tool: read the fault status with the engine running. Fault found means permanent, and No fault found means sporadic and not active right now
- 2Check that the connectors at the throttle unit and the ECM are secure and free from corrosion
- 3Check that the throttle is not blocked by any object and not sticking. Clean as needed
- 4Use a multimeter on the throttle motor wiring for open circuit, contact with ground or supply voltage, and a short between the wires
- 5If you have a diagnostic tool: check in the parameters that the throttle unit adaptation is complete and shows OK. The adaptation itself is carried out by a workshop
- 6If the fault remains after this, faulty software in the ECM may be the cause. A workshop downloads and installs new software
Symptomer du kan merke2
- Malfunction indicator lamp (MIL) on
- Engine performance is reduced
Hva feilen kan påvirke1
- The ECM cuts power to the throttle motor, and the throttle goes to its spring-loaded return position
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.