VOLVO
ECM-9300 - Clutch pedal sensor. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
13 modellerC30 (2007–2013), C70 (2006–2013), C70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S40 (2004–2013), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V50 (2004–2013), V70 (1997–2000), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (39)
- Volvo C30 (2007–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C70 Cabriolet (1998–2005)2000Kun motor: B5244S
- Volvo C70 Coupé (1998–2002)1999Kun motor: B5254S DENSO
- Volvo C70 Coupé (1998–2002)2000Kun motor: B5244S
- Volvo S40 (2004–2013)2006Kun motor: D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2001Kun motor: B5244S, B5244S2
- Volvo S60 (2001–2009)2002Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S60 (2001–2009)2003–2005Kun motor: B5244SG, B5244SG2
- Volvo S60 (2001–2009)2006Kun motor: B5244SG, D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2008Kun motor: B5244SG, D5244T4, D5244T5, D5244T7
- Volvo S60 (2001–2009)2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo S70 (1997–2000)1999Kun motor: B5254S DENSO
- Volvo S70 (1997–2000)2000Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S80 (1999–2006)1999–2000Kun motor: B5244S, B5244S2
- Volvo S80 (1999–2006)2001Kun motor: B5244S, B5244S2, B5244SG
- Volvo S80 (1999–2006)2002Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S80 (1999–2006)2003–2005Kun motor: B5244SG, B5244SG2
- Volvo S80 (1999–2006)2006Kun motor: B5244SG
- Volvo V50 (2004–2013)2006Kun motor: D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (1997–2000)1999Kun motor: B5254S DENSO
- Volvo V70 (1997–2000)2000Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2001Kun motor: B5244S, B5244S2, B5244SG
- Volvo V70 (2000–2008)2002Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2003–2005Kun motor: B5244SG, B5244SG2
- Volvo V70 (2000–2008)2006Kun motor: B5244SG, D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: B5244SG, D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: B5244SG, D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The code concerns a clutch pedal sensor signal that is too low. The ECM receives information from the sensor and sets the code when it detects a fault in that signal. The fault may lie in the sensor, the wiring or the connectors, and the cruise control is switched off.
Mulige årsaker
- Signal cable short-circuited to ground
- Contact resistance or oxidation in the connectors
- Damaged pedal position sensor
Hva du kan gjøre
- 1Read the fault status with a diagnostic tool. It shows whether the fault is permanent or intermittent, and whether other codes are also stored
- 2If the status is wrong, make sure the clutch pedal sensor is properly fitted and adjusted
- 3With the ignition off: disconnect the connector at the ECM and use a multimeter to check that the signal cable has no contact with ground (body)
- 4Check the battery condition and charge
- 5If you have a diagnostic tool: check in live data that the clutch pedal sensor signal follows the pedal. A value that stays low points to a fault
- 6If upgraded software from 2006 or later exists for the car, it may be the solution. A workshop can load it
Symptomer du kan merke4
- ETS warning lamp lights
- Cruise control does not function at all
- Switch to gas drive is not possible
- Message in the information display
Hva feilen kan påvirke1
- Cruise control is off for the driving cycle in which the fault was detected
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.