VOLVO
ECM-930A - Clutch pedal sensor. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008)
Vis modeller per årsmodell og motor (16)
- Volvo S60 (2001–2009)2001Kun motor: B5244S, B5244S2
- Volvo S60 (2001–2009)2002Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S60 (2001–2009)2003–2005Kun motor: B5244SG, B5244SG2
- Volvo S60 (2001–2009)2006–2008Kun motor: B5244SG
- Volvo S70 (1997–2000)1999Kun motor: B5254S DENSO
- Volvo S70 (1997–2000)2000Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S80 (1999–2006)1999–2000Kun motor: B5244S, B5244S2
- Volvo S80 (1999–2006)2001Kun motor: B5244S, B5244S2, B5244SG
- Volvo S80 (1999–2006)2002Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S80 (1999–2006)2003–2005Kun motor: B5244SG, B5244SG2
- Volvo S80 (1999–2006)2006Kun motor: B5244SG
- Volvo V70 (1997–2000)2000Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2001Kun motor: B5244S, B5244S2, B5244SG
- Volvo V70 (2000–2008)2002Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2003–2005Kun motor: B5244SG, B5244SG2
- Volvo V70 (2000–2008)2006–2008Kun motor: B5244SG
Hva betyr feilkoden?
The ECM works out which gear is in use from engine speed and vehicle speed. The code concerns the clutch pedal sensor signal, and it can be set together with other fault codes.
Mulige årsaker
- Damaged clutch pedal sensor
- Clutch pedal position sensor incorrectly fitted
Hva du kan gjøre
- 1Read the fault status with a diagnostic tool, and check whether the ECM has stored other codes for the clutch pedal sensor. If ECM-9300 is stored, deal with that code first
- 2Frozen values and the counter show whether the faults were stored together, and how intermittent the fault is
- 3If you have a diagnostic tool: compare the clutch pedal sensor value in live data with the pedal released and with the pedal pressed down. The difference should be clear
- 4Check how the clutch pedal sensor is fitted and that it works
- 5After remedying: switch the ignition off for three minutes, switch it on and off again, and wait a further three minutes. If the electric cooling fan runs, wait two minutes more
Symptomer du kan merke2
- Malfunction indicator lamp (MIL) lights
- Switch to gas drive is not possible
Hva feilen kan påvirke2
- Cruise control is off for the driving cycle in which the fault was detected
- It works again at the next start if the fault is no longer present
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.