VOLVO
ECM-9320 - Clutch pedal sensor. Signal outside its permitted range
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
Clutch pedal position reaches the ECM through a sensor and a separate switch. The code is set when the ECM detects that the position sensor signal is faulty. The fault may lie in the sensor, the switch, the connectors or the wiring.
Mulige årsaker
- Contact resistance or oxidation in the connectors
- Open circuit in the signal cable from the position sensor
- Clutch pedal switch incorrectly fitted
- Clutch pedal position sensor incorrectly fitted
- Damaged clutch pedal switch
- Damaged clutch pedal position sensor
Hva du kan gjøre
- 1Check that the fuses are intact. Their locations are in the handbook or on the fuse box cover
- 2Check the clutch pedal switch and position sensor: are they correctly fitted, and are the connectors secure without oxidation or contact resistance
- 3Use a multimeter to check that the signal cable from the position sensor has no open circuit
- 4If you have a diagnostic tool: read the clutch pedal position in live data while the clutch is pressed and released. The value should follow the pedal
- 5If the sensor or connector is damaged, have a workshop replace it. The new part must also be fitted and adjusted correctly
Symptomer du kan merke1
- Starting with autostart does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.