VOLVO
ECM-940F - Brake pedal sensor. Signal outside its permitted range
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (23)
- Volvo C30 (2007–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2011Kun motor: D4164T
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2005, 2011Kun motor: D4164T
- Volvo S40 (2004–2013)2006Kun motor: D4164T, D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2005, 2011Kun motor: D4164T
- Volvo V50 (2004–2013)2006Kun motor: D4164T, D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The code can be set in two ways. Either the ECM receives a faulty signal from the brake control module (BCM) over CAN, or the BCM receives a signal from the brake position sensor that is outside its permitted range. The fault may therefore lie in the CAN communication, the BCM or the sensor.
Mulige årsaker
- Fault in the CAN communication between the ECM and the brake control module (BCM)
- The fault may lie in the brake control module (BCM)
- Damaged brake position sensor
- Damaged brake control module (BCM)
Hva du kan gjøre
- 1Read the BCM fault codes first and then the CEM codes, and deal with them. The code cannot be cleared until they are remedied
- 2If you have a diagnostic tool: check that the BCM and CEM respond when read, with the ignition on
- 3Check the CAN wires for breaks and chafing, and that the connectors are free from corrosion
- 4Check that the brake position sensor is fixed in place and that its connector is clean and secure
- 5The brake system is safety-critical. If the fault remains, have a workshop check the BCM and the sensor, and do not drive with a safety fault in the brakes
Symptomer du kan merke5
- Cruise control does not function at all
- Driving with automatic engine start/stop does not work
- Idling with automatic engine start/stop does not work
- Starting with autostart does not work
- Cruise control cannot be engaged
Hva feilen kan påvirke1
- Cruise control is switched off while the fault is active
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.