VOLVO
ECM-9530 - Accelerator pedal sensor. Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (23)
- Volvo C30 (2007–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2011Kun motor: D4164T
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2005, 2011Kun motor: D4164T
- Volvo S40 (2004–2013)2006Kun motor: D4164T, D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2005, 2011Kun motor: D4164T
- Volvo V50 (2004–2013)2006Kun motor: D4164T, D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D4164T, D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The engine control module (ECM) compares the PWM signal from the accelerator pedal sensor with the analogue signal, which reaches the ECM via the central electronics module (CEM) over the CAN network. If the analogue signal is faulty or implausible, or the PWM signal does not agree with the values calculated, the code is set.
Mulige årsaker
- Troubleshoot the central electronics module (CEM) first
- Look for the cause in the CAN network
- Contact resistance or oxidation in the connections to the pedal sensor
- Supply voltage or signal wire shorted to supply voltage
- Open circuit or short to ground in the signal wire
- Damaged accelerator pedal position sensor
Hva du kan gjøre
- 1First read out and fix the fault codes in the central electronics module (CEM). Only then can this code be cleared
- 2If you have a diagnostic tool, check whether a communication fault code for the CAN network is also stored, and fix it
- 3Check the pedal sensor connector and the wiring for contact resistance and oxidation
- 4Check the connections at the engine control module and the pedal sensor for play, contact resistance and oxidation
- 5With a multimeter between the signal wire and ground while the pedal moves, check that the values follow the movement without interruptions
Symptomer du kan merke5
- Text message in the information display
- Poor accelerator pedal response
- Automatic start and stop does not work
- Autostart does not work when starting
- Engine stumbles, surges or runs unevenly at steady speed
Hva feilen kan påvirke1
- Engine power is limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.