VOLVO
ECM-953F - Brake light switch/Pedal position sensor. Signal outside its permitted range
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo C30 (2007–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Kun motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Kun motor: D5244T8
- Volvo S40 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Kun motor: D5244T8
- Volvo V50 (2004–2013)2007Kun motor: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Kun motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Kun motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Kun motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Kun motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5
Hva betyr feilkoden?
The ECM watches the pedal position sensor and the brake light switch. If their signals become implausible relative to each other while both pedals are pressed, the code is set. The check runs while driving, with the accelerator pressed and then the brake.
Mulige årsaker
- Loose contact, contact resistance or oxidation in the connections
- One of the pedal sensor signals is faulty
- Fault in the brake light switch signal
- Damaged brake light switch
- Damaged accelerator pedal position sensor
Hva du kan gjøre
- 1Check whether any fault codes are stored in the brake system control module (BCM) or the central electronics module (CEM). Fix them first
- 2If you have a diagnostic tool: read the brake light switch status and see that it changes when the brake pedal is pressed and released
- 3With the ignition on, read the accelerator pedal signal in live data and see that it rises when the pedal is pressed
- 4Check the connectors on the brake light switch and the pedal sensor for contact resistance and oxidation
- 5Check that the brake light switch is correctly fitted and correctly adjusted
Symptomer du kan merke1
- Poor accelerator pedal response
Hva feilen kan påvirke1
- Engine power is limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.