VOLVO
ECM-A02B - Communication, control module for anti-lock brakes (ABS). Faulty signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
7 modellerC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008)
Vis modeller per årsmodell og motor (19)
- Volvo C70 Cabriolet (1998–2005)2000Kun motor: B5244S
- Volvo C70 Coupé (1998–2002)1999Kun motor: B5254S DENSO
- Volvo C70 Coupé (1998–2002)2000Kun motor: B5244S
- Volvo S60 (2001–2009)2001, 2009Kun motor: B5244S, B5244S2
- Volvo S60 (2001–2009)2002Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S60 (2001–2009)2003–2005Kun motor: B5244S, B5244S2, B5244S6, B5244SG, B5244SG2
- Volvo S60 (2001–2009)2006Kun motor: B5244S, B5244S2, B5244S6, B5244SG
- Volvo S60 (2001–2009)2007–2008Kun motor: B5244S, B5244S2, B5244SG
- Volvo S70 (1997–2000)1999Kun motor: B5254S DENSO
- Volvo S70 (1997–2000)2000Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S80 (1999–2006)1999–2000Kun motor: B5244S, B5244S2
- Volvo S80 (1999–2006)2001, 2006Kun motor: B5244S, B5244S2, B5244SG
- Volvo S80 (1999–2006)2002–2005Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (1997–2000)1999Kun motor: B5254S DENSO
- Volvo V70 (1997–2000)2000Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2001, 2007–2008Kun motor: B5244S, B5244S2, B5244SG
- Volvo V70 (2000–2008)2002Kun motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2003–2005Kun motor: B5244S, B5244S2, B5244S6, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2006Kun motor: B5244S, B5244S2, B5244S6, B5244SG
Hva betyr feilkoden?
The engine control module has registered a fault in its communication with the ABS control module. Communication runs over the CAN network, and the fault may lie in an open CAN wire or in the ABS control module, which may be defective. Anti-spin does not work for as long as the fault is present.
Mulige årsaker
- Open circuit in the CAN wiring
- Defective anti-lock brake (ABS) control module
Hva du kan gjøre
- 1Read the fault codes in the engine control module and in the central electronic module (CEM) and note which are stored
- 2Check that the CAN network connectors are fully seated and free from oxidation, and look for chafing in the wiring harness
- 3Measure with a multimeter that the CAN wires have no open circuit, after disconnecting the battery negative lead
- 4If the fault returns after checking the wiring, have a workshop check the ABS module; anti-spin and ABS belong to the braking system, so do not work on it yourself
Symptomer du kan merke1
- Anti-spin does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.