VOLVO
ECM-A038 - Speed signal, front wheel pair. Defective signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (3)
Hva betyr feilkoden?
The engine control module calculates vehicle speed using, among other things, the wheel sensors on the front wheels. If the calculated speed does not match the vehicle speed available on the CAN network, the code is set. Because the comparison is made while driving, the fault mainly shows when the car is moving.
Mulige årsaker
- A fault in the brake control module (BCM)
- CAN-related fault codes in the central electronic module (CEM)
Hva du kan gjøre
- 1Read the fault codes in the BCM, then in the CEM
- 2Check that the connectors to the front wheel sensors are fully seated and free from dirt and oxidation, and look for chafing in the wiring
- 3Fault-trace and remedy the faults in the brake control module and the CAN-related codes in the CEM first; this code cannot be cleared until they have been remedied and cleared
- 4Do not work on the wheel sensors or the braking system yourself, since they affect the brakes and the ABS; have a workshop check them
Symptomer du kan merke4
- Malfunction indicator lamp (MIL) is on
- Automatic engine start and stop does not work while driving
- Automatic engine start and stop does not work at idle
- Autostart does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.