Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-A10B
    VOLVO

    ECM-A10B - LIN communication. Alternator control module (ACM), faulty communication

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    4 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (6)
    • Volvo C30 (2007–2013)2007–2011Kun motor: B5244S4
    • Volvo C70 (2006–2013)2006Alle motorer unntatt: B5254T3
    • Volvo C70 (2006–2013)2007–2010Kun motor: B5244S4, B5244S5
    • Volvo C70 (2006–2013)2011Kun motor: B5244S4
    • Volvo S40 (2004–2013)2005–2010Kun motor: B5244S4, B5244S5, B5244S7
    • Volvo V50 (2004–2013)2005–2010Kun motor: B5244S4, B5244S5, B5244S7

    Hva betyr feilkoden?

    The engine control module communicates with the alternator control module (ACM) over the LIN network, a simple serial communication link. The code is set when the engine control module detects interference in its communication with the alternator control module. The fault may therefore lie in the wiring between the modules or in either of them.

    Mulige årsaker

    • Contact resistance and oxidation in the terminals
    • Short circuit between the LIN wires
    • Open circuit in one of the LIN wires
    • Damaged alternator control module (ACM), which is also the charge regulator
    • An alternator not designed for LIN communication is fitted
    • Internal fault in another module on the same part of the LIN network

    Hva du kan gjøre

    1. 1Check that the connector on the alternator control module is fully seated and free from oxidation
    2. 2With a multimeter, check that the signal wire between the engine control module and the alternator control module has no open circuit and no contact with ground or supply voltage
    3. 3Has the alternator been replaced recently? Check that it is intended for LIN communication, since a different alternator can cause this code
    4. 4If the wiring is intact, the alternator control module may be damaged; have a workshop replace it and then check that the fault is gone

    Symptomer du kan merke1

    • The generator not charging warning lamp lights while the engine is running

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.