VOLVO
ECM-B10A248 - Crash Input. System Internal Failures. Supervision software failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
Although the code is named a fault in the supervision software, it is an event-controlled information code that records a collision. The engine control module registers internally whether the car has been in a crash, and the code is set when the central electronic module (CEM) reports that a collision has taken place. The code therefore does not indicate a fault in the engine control module.
Mulige årsaker
- The code comes from information about a crash, not from a fault that must be repaired
Hva du kan gjøre
- 1Clear the fault code as a normal code once you have read it; it needs no fault-tracing
- 2If airbags have deployed or the car has been in a collision, have a workshop check the supplemental restraint system
- 3The restraint system is safety-critical; do not work on it yourself
Symptomer du kan merke1
- Engine is hard to start and cranks slowly
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.