VOLVO
ECM-B10FF68 - Ignition control. Algorithm Based Failures. Event information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (27)
- Volvo S60 (2011–)2011–2012Kun motor: B6304T4
- Volvo S60 (2011–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Kun motor: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Kun motor: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2010Kun motor: B6324S2
- Volvo S80 (2007–)2011–2015Kun motor: B6324S4
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V60 (2011–)2011–2012Kun motor: B6304T4
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Kun motor: B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Kun motor: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Kun motor: B6304T2, B6324S
- Volvo V70 (2008–)2010Kun motor: B6324S2
- Volvo XC60 (2009–)2009Kun motor: B6304T2
- Volvo XC60 (2009–)2010Kun motor: B6304T2, B6324S2
- Volvo XC60 (2009–)2011–2014Kun motor: B6304T4, B6324S4
- Volvo XC60 (2009–)2015Kun motor: B5204T9, B5254T12, B5254T14, B6304T4, B6324S4
- Volvo XC70 (2008–)2008Kun motor: B6324S
- Volvo XC70 (2008–)2009Kun motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010Kun motor: B6324S2
- Volvo XC70 (2008–)2011–2015Kun motor: B6324S4
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The engine control module monitors the engine's ignition. This is an event-controlled information code, set when the ignition stays outside its limits for a certain time while the engine runs. It does not point to a fault in the module, and it does not indicate a fault that must be repaired.
Mulige årsaker
- The code does not come from any fault that requires repair
Hva du kan gjøre
- 1Do not fault-trace the code by itself; it is an information code showing that the ignition has been outside its limits for a while
- 2If the car jerks or hesitates, read the fault codes in the engine control module and deal with the other codes first
- 3Clear the code once any other faults are remedied, then road test the car to see whether it returns
Symptomer du kan merke5
- Jerky running
- Message in the display
- Poor performance and lack of power, especially when starting
- Hesitation and surging during acceleration, deceleration and at steady speed
- Text window with a warning symbol and text message
Hva feilen kan påvirke1
- Fuel supply is cut off while the fault is active
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.