VOLVO
ECM-C400 - Configuration fault. Faulty configuration
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
3 modellerC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (13)
- Volvo C30 (2007–2013)2007–2009Kun motor: B4184S11, B4184S8, B4204S3
- Volvo C30 (2007–2013)2010Kun motor: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo C30 (2007–2013)2011–2013Kun motor: B4204S3, B4204S4
- Volvo S40 (2004–2013)2005Kun motor: B4184S11
- Volvo S40 (2004–2013)2006Kun motor: B4184S11, B4184S8
- Volvo S40 (2004–2013)2007–2009Kun motor: B4184S11, B4184S8, B4204S3
- Volvo S40 (2004–2013)2010Kun motor: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo S40 (2004–2013)2011–2012Kun motor: B4204S3, B4204S4
- Volvo V50 (2004–2013)2005Kun motor: B4184S11
- Volvo V50 (2004–2013)2006Kun motor: B4184S11, B4184S8
- Volvo V50 (2004–2013)2007–2009Kun motor: B4184S11, B4184S8, B4204S3
- Volvo V50 (2004–2013)2010Kun motor: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo V50 (2004–2013)2011–2012Kun motor: B4204S3, B4204S4
Hva betyr feilkoden?
The engine control module holds a unique configuration ID that must agree with the other modules on the car's CAN network. If no acceptable ID arrives in time, the fault code is set. The driver normally notices no symptoms.
Mulige årsaker
- Wrong CAN configuration ID, for example when the module is not made for this exact car, such as a used unit with other software or hardware
- Open circuit in the CAN wiring between the engine control module and the CEM
Hva du kan gjøre
- 1If the module has been replaced, for example with a used one, ask a workshop to check the configuration, since it may carry the wrong ID for this car
- 2Read out the fault codes in the CEM and the engine control module, and fix the CAN codes first
- 3Check that the fuses are intact and that the battery has a good charge
- 4Look for breaks and chafing on the CAN wiring between the engine control module and the CEM
- 5Erase the fault code once the faults are fixed, then road test the car to see whether it comes back
- 6If the fault remains, have a workshop check the configuration and software with diagnostic equipment
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.