VOLVO
ECM-E013 - Configuration fault. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The engine control module sets itself up from the vehicle configuration held by the CEM, which keeps the number of software versions down. The fault code is set when the engine control module finds that a parameter from the CEM is wrong. A default value is then used for that parameter.
Mulige årsaker
- A control module or function was taken out of or put into the car, and the configuration was not updated correctly
Hva du kan gjøre
- 1There is no specific fault-tracing for this code. Ask whether any control module or function has been removed or added to the car
- 2If something has been added or removed, have a workshop update the vehicle configuration, since that is workshop work
- 3Read out the fault codes in the CEM and the engine control module, and fix any CAN codes first
- 4Erase the fault code once the configuration is correct, then check that it does not return
- 5If the fault remains, have a workshop check the configuration with diagnostic equipment
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- A default value is set for the incorrect parameter
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.