VOLVO
ECM-F00D - Gas pressure sensor, governor. Static signal
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008)
Vis modeller per årsmodell og motor (3)
Hva betyr feilkoden?
The engine control module keeps track of the low-pressure gas side, measured by a sensor between the regulator and the fuel rail. The fault code concerns a sensor signal that changes too little although the driving load varies. Gas operation is then not possible, and the car switches over to petrol by itself.
Mulige årsaker
- Damaged gas pressure sensor
- The gas pressure sensor signal changes implausibly little when the driving load varies
Hva du kan gjøre
- 1Check that the fuses are intact. Their locations are in the owner's manual
- 2Inspect the sensor plug and its terminals for contact resistance and oxidation
- 3If you have a diagnostic tool: read the gas pressure in live data while the engine runs on gas, and check that the value changes when the engine is loaded
- 4Erase the fault code and road test the car on gas to see whether it returns
- 5If the fault remains, have a workshop check the gas regulator and the gas pressure sensor
Symptomer du kan merke2
- Gas power is not possible
- Automatic switchover from gas to petrol power
Hva feilen kan påvirke1
- A fixed value replaces the reading from the gas pressure sensor
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.