VOLVO
ECM-P000B00 - Exhaust (B) Camshaft Position Slow Response Bank 1. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellS60 (2011–)
Vis modeller per årsmodell og motor (1)
Hva betyr feilkoden?
The engine control module monitors the exhaust camshaft position, bank 1, and has found that it does not match the commanded position. The code is a general fault with no more specific description of the fault. It is only set when the engine is running and camshaft control is active, and camshaft control is then switched off.
Mulige årsaker
- Low engine oil pressure
- Poor quality engine oil
- Faulty camshaft control valve
- Mechanical fault in the VVT unit
Hva du kan gjøre
- 1Check the fuse for the supply voltage to the exhaust camshaft control valve
- 2Check the engine oil level and quality on the dipstick, especially if the oil is contaminated
- 3If you have a diagnostic tool: activate exhaust camshaft control and check that it responds
- 4If the oil is in order but the fault remains: have a workshop clean the control valve, or replace it if cleaning does not help
- 5If the fault returns after this: have a workshop check the VVT unit
Symptomer du kan merke4
- Check engine lamp lit or behaving abnormally
- Engine is hard to start and cranks slowly
- The car lacks power
- Engine hesitates or runs jerkily on acceleration and at steady speed
Hva feilen kan påvirke1
- Camshaft control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.