VOLVO
ECM-P001313 - Exhaust (B) Camshaft Position Actuator Circuit / Open (Bank 1). General Electrical Failures. Circuit open
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The engine control module checks the signal wire to the exhaust camshaft control valve and has found an open circuit in it. The code is a general electrical fault with an open circuit. It is set when the ignition is on and the engine is running.
Mulige årsaker
- Open circuit in the signal wire
- Open circuit in the supply wire
- Faulty exhaust camshaft control valve
Hva du kan gjøre
- 1Read the code, clear it and road test the car to see whether it returns
- 2Check the fuse for the circuit to the exhaust camshaft control valve
- 3Check the connector at the valve for loose, oxidised or damaged parts
- 4Use a multimeter to check that the wires to the valve have no open circuit, and look for chafing along the cable
- 5If the fault returns: have a workshop check the control valve, as it may be faulty
Symptomer du kan merke1
- Check engine lamp lit or behaving abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.