VOLVO
ECM-P001600 - Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
12 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (32)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2013Kun motor: B6304T4, D4162T
- Volvo S60 (2011–)2014Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, D4162T, D4204T5
- Volvo S60 (2011–)2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T3, B6304T4, B6304T5, D4162T, D4204T5
- Volvo S80 (2007–)2007Kun motor: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Kun motor: B6304T2, B6324S, B8444S, D4204T
- Volvo S80 (2007–)2010Kun motor: D4204T
- Volvo S80 (2007–)2012–2013Kun motor: D4162T
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, D4162T, D4204T5
- Volvo V40 (2013–)2013–2014Kun motor: D4162T
- Volvo V40 (2013–)2015Kun motor: B4204T11, D4162T, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: D4162T
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4162T, D4204T14
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2013Kun motor: B6304T4, D4162T
- Volvo V60 (2011–)2014Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, D4162T, D4204T5
- Volvo V60 (2011–)2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B6304T3, B6304T4, B6304T5, D4162T, D4204T5
- Volvo V70 (2008–)2008–2009Kun motor: B6304T2, B6324S, D4204T
- Volvo V70 (2008–)2010Kun motor: D4204T
- Volvo V70 (2008–)2012–2013Kun motor: D4162T
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4162T, D4204T5
- Volvo XC60 (2009–)2009–2010Kun motor: B6304T2
- Volvo XC60 (2009–)2011–2013Kun motor: B6304T4
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, D4204T5
- Volvo XC70 (2008–)2008Kun motor: B6324S
- Volvo XC70 (2008–)2009Kun motor: B6304T2, B6324S
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
- Volvo XC90 (2003–)2005–2006Kun motor: B8444S
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Kun motor: B6324S5
Hva betyr feilkoden?
The engine control module compares the camshaft position with the crankshaft position using signals from the camshaft sensor and the crankshaft sensor, and adjusts the adaptation if they do not agree. The code concerns bank 1, sensor A, and is set when the adaptation value changes by more than a certain amount.
Mulige årsaker
- Incorrectly set camshafts
- Faulty camshaft control valve
- Damaged VVT unit
- Damaged or worn timing chain
- Faulty camshaft sensor or crankshaft sensor
- Poor quality engine oil
Hva du kan gjøre
- 1Read the code, clear it and road test the car to see whether it returns
- 2If you have a diagnostic tool: read the camshaft adaptation and timing angle in live data with the engine running, and compare with the target value
- 3Check the connectors at the camshaft sensor and the crankshaft sensor for loose or oxidised parts
- 4Use a multimeter to check that the signal wire from the camshaft sensor has no open circuit
- 5Check that the engine oil level is correct and that the oil is clean and of the right quality
- 6If the fault returns: have a workshop check the camshaft basic setting, the control valve and the VVT unit
Symptomer du kan merke5
- Engine is hard to start
- The car lacks power, especially when pulling away from standstill
- Uneven idle
- Engine hesitates or runs jerkily
- Check engine lamp lit or behaving abnormally
Hva feilen kan påvirke1
- The control module uses a fixed value for the camshaft adaptation
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.