VOLVO
ECM-P001621 - Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Signal Failures. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (32)
- Volvo S60 (2011–)2011–2012Kun motor: B6304T4
- Volvo S60 (2011–)2013Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2010Kun motor: B6304T2, B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Kun motor: B6304T4, B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012Kun motor: B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013Kun motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2014Kun motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2015Alle motorer unntatt: B4164T, D4162T, D4204T5, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B4204T11, B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011–2012Kun motor: B6304T4
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011–2012Kun motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013Kun motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Kun motor: B4204T11, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Kun motor: B4204T11, B5204T9, B6304T4
- Volvo XC60 (2009–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2013Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Alle motorer unntatt: B4204T7, D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2013Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The engine control module checks the camshaft position against the crankshaft position and adjusts the camshaft adaptation. The code concerns bank 1, sensor A, and is set when the adaptation value falls below a limit. Adaptation is carried out during engine braking, and the code is checked after it has been completed.
Mulige årsaker
- Incorrectly set camshafts
- Damaged VVT unit
- Poor quality engine oil
- Faulty camshaft control valve
- Damaged or worn timing chain
Hva du kan gjøre
- 1Read the code and note whether it is active right now or only stored
- 2If you have a diagnostic tool: read the camshaft adaptation and timing angle in live data with the engine running, and compare with the target value
- 3Check the engine oil level and that the oil is clean and of the right quality
- 4Have a workshop remove the control valve for cleaning and check the oil passages in the cylinder head, or fit a new valve
- 5If the fault returns: have a workshop check the camshaft basic setting and the VVT unit
Symptomer du kan merke5
- The car lacks power when pulling away from standstill
- Engine is hard to start and cranks slowly
- Uneven idle
- Engine stalls while driving
- Check engine lamp lit or behaving abnormally
Hva feilen kan påvirke1
- The control module uses a fixed value for the camshaft adaptation
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.