VOLVO
ECM-P001694 - Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. Component Failures. Unexpected operation
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The engine control module checks the camshaft position against the crankshaft position. If the exhaust camshaft is out of position and sits too far ahead of the crankshaft, the control module adjusts the position, and the code is set when the adaptation value rises above a certain value.
Mulige årsaker
- Poor quality engine oil
- Incorrectly set camshafts
- Camshaft timing belt has skipped teeth
- Faulty camshaft control valve
- Mechanical fault in the VVT unit
Hva du kan gjøre
- 1Read the code, clear it and road test the car to see whether it returns
- 2Check the engine oil level and quality, and that it is free from contamination
- 3If you have a diagnostic tool: activate exhaust camshaft control and check that it responds
- 4Have a workshop check the camshaft basic setting and the timing belt
- 5Have a workshop clean the control valve, or replace it if cleaning does not help
- 6If the fault returns: have a workshop check the VVT unit
Symptomer du kan merke1
- Check engine lamp lit or behaving abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.