VOLVO
ECM-P001794 - Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor B. Component Failures. Unexpected operation
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The engine control module adjusts the camshaft adaptation when a camshaft sits too far ahead of the crankshaft, and the code is set when the adaptation value rises above a certain value. The code is labelled bank 1, sensor B, but the condition concerns the intake camshaft, so both camshafts may need checking.
Mulige årsaker
- Poor quality engine oil
- Incorrectly set camshafts
- Camshaft timing belt has skipped teeth
- Damaged camshaft control valve
- Mechanical fault in the VVT unit
Hva du kan gjøre
- 1Read the code, clear it and road test the car to see whether it returns
- 2Check the engine oil level and quality, and that it is free from contamination
- 3If you have a diagnostic tool: activate camshaft control and see whether the valves respond
- 4Have a workshop check the camshaft basic setting and that the timing belt sits correctly
- 5Have a workshop clean the camshaft control valves, or fit new ones if the fault remains
- 6If the fault returns: have a workshop check the VVT unit
Symptomer du kan merke1
- Check engine lamp lit or behaving abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.